Starting in the late 2000's, convenience stores, grocery stores and other retail establishments were replacing their existing fluorescent lights with more efficient LEDs. Fueled largely by rebates from utility companies and the promise to slash energy costs substantially, these establishments couldn't replace their fixtures fast enough. Business was booming.
LED menjanjikan pengguna keupayaan untuk membuang produk lampu pendarfluor, pijar, HID dan lain-lain lampu tradisional yang tidak cekap mereka untuk sumber cahaya yang menawarkan hayat lebih lama (sehingga 50,000 jam), menggunakan tenaga yang jauh lebih sedikit untuk beroperasi, berfungsi dengan lebih baik dalam suhu sejuk, dihidupkan serta-merta dan disambungkan dengan mudah kepada kawalan untuk pemalapan, pengesan penghunian dan seumpamanya. Walaupun LED telah-dan{3}}menyampaikan janji itu, seperti segala-galanya, semua perkara yang baik mesti berakhir.
Some ten years on and establishments that were early adopters of LED lighting are starting to see some of those fixtures fail. Still others are beginning to notice that these lights may not be as bright as they were when they were installed. So what's happening? To put it simply, this is how LEDs die. Most don't typically burn out 'catastrophically', they fade slowly over time.
Most LED fixtures developed ten years ago would have an average life expectancy of 50,000 hours – or about 6 years if left on 24/7. Life expectancy looks at two things – the power supply, and when the light emitted from the LED drops to 70 percent of it's original output. Most LED drivers ten years ago had an expected life of about 5 years. The power supply is typically the weakest link in any LED system and will eventually experience a catastrophic failure. This is not a major deal, or a big change over fluorsecent fixtures using ballasts, if the LED fixture allows for an easy replacement of the power supply. Absent a defect or misuse of the fixture, most LEDs will continue to emit light so long as there is power going to the diode. The caveat is that the light will diminish over time and become dimmer and dimmer. The specifications for most LED fixtures was L70 at 50,000 hours, or the time at which the LEDs would reach 70 percent of their original output. While the fixture itself may still be in working order, users may want to replace them to meet their originally designed light levels. Additionally, LEDs continue to see constant improvements in both their efficacy and life expectancy, making the specs of fixtures made ten plus years ago nearly obsolete. Replacing old LED fixtures with newer ones could easily yield additional energy savings.
For grocery, convenience and other retail stores that are seeing failures in their refrigerated display case LED lighting, there are a couple of things to keep in mind. First, replacing a burned out LED light is probably not as easy as swapping out a fluorescent tube or changing a traditional light bulb. There is no standardized form factor for these types of LED light sources. In other words, they weren't designed according to an ANSI standard where you can just swap one manufacturers light product for an equivalent. So if the led board can even be replaced in these fixtures, in all likelihood you will need to go back to the original manufacturer of that fixture.
Kembali ke pengilang asal mungkin menimbulkan cabaran dengan sendirinya. Banyak pengilang menggunakan kereta pancaragam-fit retro apabila perniagaan sedang berkembang pesat. Apabila peluang dan rebat mula kering, ramai yang meninggalkan rangkaian produk mereka atau gulung tikar sama sekali. Dan beberapa syarikat itu adalah gergasi yang terkenal dalam industri.
Lastly, it's important to note that any replacement that was installed using rebates will not qualify for additional rebates to replace them. That was a one-time shot. Further, most utility companies have guidelines on what they will rebate, so even if you're switching out the unit for the first time, if it's already LED it probably won't qualify for a rebate. This means the burden for the cost of the re-lamp (whether it's just replacing a component, or replacing the entire fixture) will be solely on the store.
Jadi apakah maksud ini untuk kedai G-dan kedai C-?
The first thing you should do is plan. If you retrofitted your refrigerated display cases and other lighting in the store to LED, you should estimate when these lamps will begin to fail. You should use the original specifications and manufacturer's warranty as your guideline (see example of discontinued Sylvania LEDstixx refrigeration lighting system. Click for larger image). Next, contact the installer or manufacturer you purchased the retrofits from and find out if they have an off-the-shelf replacement solution in place.
If they don't offer an affordable replacement, or they are out of the business altogether, consider looking for an LED lighting manufacturer that can offer an off-the-shelf solution that will fit your application, or customize one for you. ILT has worked with numerous customers, from regional grocers to national chains, to design customized retrofit solutions that meet both performance and budget requirements.
